GENERAL DIMENSIONS
Transport Length: 11500mm
Transport Width: 2650mm
Transport Height: 2620mm
Engine: 450KW
Weight: 26500KG
Rotor Dimensions: Cutting width 1400mm, rotor diameter 1300mm,
8 flying knives/12 flying knives
Feed Width: 1400mm
Conveyor Dimensions: 1.4m × 10m
Discharge Height: 4.5m

CHIP DRUM OPTION
Millbox opening: 54″ x 24.4″ (137 cm x 62 cm)
Drum diameter: 51.2″ (130 cm)
Number of knives: 8
Depth of cut: Ranging from .125″ to 1″ (.3 cm to 2.5 cm)

ELECTRIC MOTORS
feed motor horsepower: 7.5kw

feed motor horsepower: 7.5kw

feed motor horsepower: 7.5kw
Discharge motor horsepower: 4kw

Conveyor motorhorsepower: 5.5kw
Voltage: 380 V/460 V
Frequency: 50 Hz/60 Hz
Phase: Three phases
Enclosure: TEFC (totally enclosed, fan-cooled)

CONVEYOR
Belt width: 55.1″ (140 cm)
Belt design: 3-ply – 330# with V-cleat
Belt length: 78.7′ (20 m)

HYDRAULIC PUMP STATION
Tank capacity: 15.9 gal (60L)

INFEED CONVEYOR
Feed table width: 54.1″ (1.375m)
Feed table length: 15′ (5.2m)
Loading height: 6.5′ (2 m)

CONTROL PANEL OPTIONS
VFD (variable frequency drive) panel: 380 V or 460 V, NEMA Type
5 enclosure
Soft-start starter panel: 380 V or 460 V, NEMA Type 4 enclosure

INFEED ROLLER
Max feed height: 24.4″ (62cm)
Infeed roller diameter: 12.4″ (31.5cm)

CONTROLS
Stationary: Side-mounted LCD control station
Remote: Multifunction with built-in LCD display, max 300′ (91.4 m)
operating range

DUPLEX DRUM OPTION
Millbox opening:54.1″ x24.4″ (137 cm x62cm)
Drum diameter: 51.2″ (130 cm)
Number of hammers: 23